RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles

RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles

From RPM:

RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles
Rear Skid Plate for many ARRMA 6S automobiles

One of many highest greenback alternative gadgets on any car is the chassis, particularly when that chassis is a 3 – 4mm thick aluminum plate. On ARRMA 6S automobiles, there’s completely no safety for the underside of the chassis. Rocks, roots, asphalt, and so forth, can all create nasty scabs, scrapes and dents that can ultimately result in the necessity for a alternative.

Assist scale back skid and scrape injury by putting in an RPM Rear Skid Plate to your favourite experience. The areas most inclined to wreck are on the excessive ends of the chassis and the RPM Rear Skid Plate protects the rear finish with 4mm of RPM engineering grade nylons that isn’t solely extraordinarily powerful and sturdy, it additionally slides up and over obstacles a lot simpler than aluminum. The vanguard of our skid plate has been rolled to a skinny edge to cut back the chance of it catching whereas the rear is a full 4mm thick for a long-lasting skid plate constructed to deal with some critical punishment!

Tech Notes: The RPM #81332 Skid Plate is appropriate with V5 & EXB mannequin 6S ARRMA automobiles and is reverse appropriate with older model automobiles (V1 – V4) as effectively.

#81332 – $8.95

RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles RPM Skid Plates & Front Bumper For ARRMA 6S Vehicles

Entrance Bumper and Skid Plate for the ARRMA Kraton 6S (V5, EXB & older fashions)

The RPM Entrance Bumper and Skid Plate for the ARRMA Kraton 6S has been up to date to work with all present variations, from the V5 and EXB editions in addition to older fashions. The differential clearance space has been widened for the bigger differential hump discovered on the V5. Moreover, we’re now together with a hinge pin retainer plate so no extra components are essential to run our entrance bumper.

Similar to our earlier model, our Kraton 6S Entrance Bumper is structurally engineered so as to add a lot wanted impact-absorption to the entrance of the Kraton. The RPM entrance bumper dramatically reduces transferred impression forces to the chassis. Moreover, our two-piece design incorporates a 4mm thick skid plate with 1.5mm skid ribs, extending greater than 1-1/2” (38mm) in entrance of the chassis and protects the entrance of that costly aluminum chassis from skid and impression injury. We then bolt an enormous, 3/8” x 1/2″ x 6-3/4” (9.5mm x 12.7mm x 171.5mm) curved oval bumper on high to assist defend the physique as effectively.

Every RPM Entrance Bumper and skid plate is molded in black from our unique mix of engineering grade nylons for unmatched power and sturdiness. All RPM molded merchandise are 100% made within the USA and backed by our restricted lifetime guarantee towards breakage.

Tech Notes: The RPM Entrance Bumper and Skid Plate is designed particularly for the ARRMA Kraton V5 & EXB, but will match most ARRMA automobiles (V5 and older) operating inventory gearbox case set #AR310854 or #AR310427 and any Durango car operating inventory gearbox case set #TD210046. Sadly, RPM can’t assure correct physique clearance with any ARRMA / Durango car not listed right here (some physique trimming could also be essential to clear the bumper on these automobiles).

#81812 – $20.95
Visit RPMRCProducts.com
See more posts about RPM

Eaglemoss Jeep willys 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *