10 Race-Winning Touring Car Bodies From PROTOform

10 Race-Winning Touring Car Bodies From PROTOform

SPONSORED ARTICLE

Navigating a excessive pace touring automobile observe and competing in opposition to quite a few different high-end vehicles is usually a rush. At present’s touring vehicles are insanely quick and may deal with like a Components 1 automobile. A part of the efficiency improve will be instantly attributed to the physique getting used. Should you want that added edge over your TC competitors, then be sure you take a look at the 10 race-winning touring automobile our bodies from PROTOform that can suit your 190mm touring automobile chassis. They provide a pleasant selection that won’t solely assist in on-track dealing with when at pace and within the corners, however may even give your prized TC trip some critical fashion factors.

10 Race-Winning Touring Car Bodies From PROTOform

Cadillac ATS-V.R clear physique—1543-30

10 Race-Winning Touring Car Bodies From PROTOform

Within the early 2000s, Cadillac developed and raced the superior wanting Cadillac CTS race automobile. Then quick ahead to 2015 and so they got here out with their manufacturing unit works ATS-V.R. This third technology of the V-series of race vehicles was constructed to worldwide FIA and GT3 specs. This opened the door in order that it may compete in additional than thirty totally different GT sequence all over the world. Within the World Problem sequence, the ATS-V.R has loved a number of general wins and pole positions with prime drivers Johnny O-Connell and Andy Pilgrim on the wheel.

Due to PROTOform you’ll be able to benefit from the success of the full-size ATS-V.R in 1/10-scale with this formally licensed clear physique. With all the main points accounted for and intensive sticker sheet, you’ll be able to replicate a really practical wanting ATS-V.R thus compete in courses such because the USGT, GT10 and Spec Grand Touring. Real .030-inch polycarbonate is used to mould the physique which incorporates the injection molded wing struts that can help the distinctive rear wing design. What makes this wing particular is that it may be setup in two totally different variations. A 10mm vertical part for sanctioned USGT racing and a 20mm higher lad-back trim for membership racing. The {hardware} is included to mount up the wing and overspray movie comes on the physique to assist guarantee a clear paint job.

SPECS

  • Size: 17.5 in. (445mm)
  • Width: 7.63 in. (194mm)
  • Top: 4.29 in. (109mm)
  • Wheelbase: 10.2 in. (258mm)

10 Race-Winning Touring Car Bodies From PROTOform

 

Chevrolet Camaro Z/28 clear physique—1544-30

PROTOform likes to maintain their finger on the heart beat of the racing scene which results in the event of many racing-winning our bodies. For instance the PROTOform Chevrolet Camaro ZL1 rapidly turned the physique that everyone was working because it racked up numerous IIC, Nationwide and Regional race titles. Then when Chevy reengineered their Camaro right into a track-ready Z/28, it was a simple choice for PROTOform to make use of it as the subsequent evolution of their Camaro and created this gorgeous Chevrolet Camaro Z/28 clear physique.

This formally licensed Camaro Z/28 physique was refined identical to what Chevy did to the total measurement Camaro. PROTOform lowered its stance, gave it an enlarged entrance splitter, a signature silver “Move-tie” grill emblem and built-in decklid spoiler all to reinforce the aero efficiency and general aesthetic fashion. Together with window masks, element sticker sheet and overspray movie the Camaro Z/28 physique comes with s add-on rear wing that may be mounted on the twin injection molded struts and connected with included mounting {hardware}.

SPECS

  • Size: 17.7 in. (449mm)
  • Width: 7.67 in. (195mm)
  • Top: 4.29 in. (109mm)
  • Wheelbase: 10.2 in. (258mm)

Chevrolet Corvette C7.R clear physique—1557-30

10 Race-Winning Touring Car Bodies From PROTOform

The Chevrolet Corvette has been tremendous standard ever since its launch again within the 50’s and has made the race observe its house. Right here PROTOform created the Corvette C7.R touring automobile physique to pay homage to the tremendous profitable full-size C7.R. It captured the triple-crown of GTLM-class endurance racing with wins on the famed 24 Hours of Le Mans, 24 Hours of Daytona and the 12 Hours of Sebring.

Corvette Racing’s championship heritage is dropped at the USGT class with this PROTOform Chevrolet Corvette C7.R clear physique. PROTOform did it proper and bought it formally licensed and gave it its signature muscular stance, swept-back roofline, large entrance splitter and facet vents. This lets you replicate the race-winning 1:1 C7.R for 190mm 1/10-scale touring automobile. The physique comes with the USGT sanctioned wing with nylon wings struts and mounting {hardware}. While you look over the included sticker sheet you will notice that it’s fairly intensive and options the Corvette branded windshield headers, “Jake” cranium hood brand, quantity plates, and USA flags.

SPECS

  • Size: 17.5 in. (444.5mm)
  • Width: 7.63 in. (194mm)
  • Top: 4.01 in. (102mm)
  • Wheelbase: 10.1 in. (256mm)


10 Race-Winning Touring Car Bodies From PROTOform

Chevrolet Corvette C8 clear physique—1574-25

10 Race-Winning Touring Car Bodies From PROTOform

10 Race-Winning Touring Car Bodies From PROTOformFollowing the discharge of the Corvette C7.R was a totally reinvented Corvette, the C8. This all-new super-car contains a mid-engine structure and killer wanting new physique design. PROTOform knew as quickly as rumors surfaced that it will be their subsequent USGT physique.

It seems that the PROTOform Chevrolet Corvette C8 formally licensed physique is completely suited to the USGT class of racing. All of the distinctive particulars of the 1:1 counterpart together with aggressive cab ahead design, placing entrance splitter, and sculpted facet doorways and vents are captured utilizing the most recent in 3D CAD and 5-axis milling tech. When you lay down the paint scheme of your alternative and apply the detailed stickers, this physique will actually come to life. The small print molded into the physique actually come out within the high-quality polycarbonate that PROTOform makes use of. Together with the physique is overspray movie, window masks, rear wing, wing buttons and mounting {hardware}.

SPECS

  • Size: 17.68 in. (449mm)
  • Width: 7.6 in. (193mm)
  • Wheelbase: 10.1 in. (257mm)



 

Chevrolet Corvette ZR1 clear physique—1563-25

10 Race-Winning Touring Car Bodies From PROTOform

The ZR1 is one imply and excessive Corvette manufacturing supercar. Underneath the hood is an excellent highly effective 755 horse engine that launches this Vette to a prime pace of 212mph. With stats like that and the pedigree of Corvette, PROTOform simply needed to carry it to 1/10-scale and makes a fantastic touring automobile physique.

As you are taking within the general element of the PROTOform Chevrolet Corvette ZR1 clear physique, you’ll be able to rapidly surmise that this physique is completely suited to USGT class TC racing. Formally licensed by Basic Motors it contains a distinctively-shaped excessive rear wing, outsized entrance grills with aggressive entrance splitter resting beneath. Lighter-weight materials is used to create this ZR1 physique, thus decreasing the middle of gravity and making this race physique extra responsive out on the observe. The physique consists of an add-on rear wing with the USGT-sanctioned 1mm trim peak, nylon wing struts and mounting {hardware}. Hottest touring vehicles will be capable to run the attractive Corvette ZR1 physique.

SPECS

  • Size: 17.5 in. (444.5mm)
  • Width: 7.63 in. (194mm)
  • Top: 4.01 in. (102mm)
  • Wheelbase: 10.0 in. (256mm)


10 Race-Winning Touring Car Bodies From PROTOform

Europa clear physique—1565-25

10 Race-Winning Touring Car Bodies From PROTOform

Now for a complete change of tempo with some European flare…enter the Europa clear physique. PROTOform developed and produced this physique particularly for the entrance wheel drive touring vehicles. Though this physique shouldn’t be instantly modeled after a full measurement automobile, it clearly has styling cues taken from standard European hatch again vehicles that compete within the full-scale TCR courses across the globe.

The rear finish of the PROTOform Europa options molded in wing platforms that help the add-on nylon wing struts and wing to provide it that practical racing look. Transferring ahead is a slammed hatchback roofline matched up with aggressive fender flares. Once more, PROTOform employed the most recent in 3D CAD and 5-axis CNC know-how to attain the excellent symmetry and high quality of the surfaces. You possibly can drop the Europa physique on any frequent 190mm touring automobile chassis. There may be additionally the good thing about a low middle of gravity as a consequence of using PROTOform’s top quality, light-weight polycarbonate. Together with the physique there are two wing struts, wing, mounting {hardware}, element decal sheet, window masks and paint then peel overspray movie.

SPECS

  • Size: 16.65 in. (423mm)
  • Width: 7.59 in. (193mm)
  • Top: 4.88 in. (124mm)
  • Wheelbase: 10.04-10.24 in. (255-260mm)

10 Race-Winning Touring Car Bodies From PROTOform

Ford GT clear physique—1550-25

We’re suckers for the Ford GT and fully love the 1/10-scale model that PROTOform created. It has that superior ultra-low stance with teardrop formed cockpit and funky B-pillar “facet wings”. PROTOform precisely captured the look of the total measurement Ford GT and helped to yield it formally licensed standing. Now you’ll be able to personal a 1/10-scale rendition of the GT class profitable automobile that gained on the 2016 24 Hours of Le Mans and again to again wins on the 24 Hours of Daytona (2017-2018).

Though the physique has an ultra-low physique line, further clearances had been built-in in order that it could possibly match over the entrance and rear shock towers. The rear wing and distinctive facet wings are add-on elements that may be connected with the included {hardware}. Should you don’t need the non-scale look of the {hardware}, you’ll be able to affix the wings with shoo-goo or excessive energy double-sided tape. Like the remainder of the PROTOform touring automobile our bodies, the Ford GT comes with a sticker sheet, window masks and overspray movie.

SPECS

  • Size: 17.25 in. (438mm)
  • Width: 7.6 in. (192.5mm)
  • Top: 3.89 in. (99mm)
  • Wheelbase: 10.2 in. (258mm)



Kind-S Mild Weight & Kind-S PRO-Lite Weight clear our bodies—1560-25/1560-22

10 Race-Winning Touring Car Bodies From PROTOformJust like the Europa physique, these Kind-S our bodies had been created by PROTOform and aren’t copies of a full-size sedan. The Kind-S Mild Weight and Kind-S PRO-Lite Weight clear our bodies are excessive downforce racing our bodies. They are perfect for modified courses or every other observe situation and or class the place extra grip is required. One can find that these our bodies supply tremendous exact steering traits together with excellent rear grip, the stability supplied is unmatched by every other physique on the 190mm electrical touring automobile market. Throughout testing by PROTOform’s workforce drivers, they found the Kind-S hand no downside dealing with a number of racing floor sorts: ETS carpet, outside or indoor asphalt, or high-grip CRC black carpet.

In an effort to obtain this spectacular degree of efficiency, the general stiffness of the physique was addressed. Ridges alongside the hood, a-pillar and trunk mattress present elevated rigidity to create much less physique tuck and fewer flex whereas not sacrificing efficiency. To help in physique positioning which is a essential physique tuning step, PROTOform included mounting marks contained in the entrance wheel arches. Positions for 0, +2mm, +4mm and +6mm are marked.

The 2 our bodies are similar besides that the PRO-Lite is roughly 15-percent lighter than the Kind-S Mild Weight. They’re additionally International Physique Spec compliant and totally EFRA and ROAR permitted.

SPECS

  • Size: 16.61 in. (422mm)
  • Width: 7.58 in. (192.5mm)
  • Top: 4.53 in. (115mm)
  • Wheelbase: 9.96-10.24 in. (253-260mm)

10 Race-Winning Touring Car Bodies From PROTOform

Vittoria GT clear physique—1573-25

10 Race-Winning Touring Car Bodies From PROTOform

The tenth and remaining race-winning PROTOform touring automobile our bodies is that this Vittoria GT clear physique. PROTOform created it for TC racers trying to compete within the scale-spec fashion courses corresponding to USGT, GT10 or Spec Grand Touring. You possibly can inform that the inspiration of the Vittoria was derived from the wave of sizzling Italian supercars which were not too long ago launched. It has a low-CG cab ahead design that not solely seems nice however will certainly give distinctive dealing with traits out on the observe. For USGT sanctioned races that require a decrease wing place or for membership racing the place further downforce is required, PROTOform provides you two trimlines to get the wing within the correct place.

Excessive-quality .030-inch polycarbonate is used to mould the Vittoria GT and is totally permitted for competitors by the USGT guidelines. To finish the physique, PROTOform gives very useful window masks and overspray movie. As soon as it’s painted, you’ll be able to end it off with the intensive decal sheet that features windshield headers and quantity plates. Simply mix the Vittoria physique together with your race-level 190mm touring automobile and you should have one onerous to beat combo.

SPECS

  • Size: 17.09 in. (434mm)
  • Width: 7.58 in. (192.5mm)
  • Top: 3.74 in. (95mm)
  • Wheelbase: 10.16 in. (258mm)

10 Race-Winning Touring Car Bodies From PROTOform

Need to see every part PROTOform has to supply? Click on HERE!

SHOP PRO-LINE RACING
Use code RCDRIVER10 to save lots of 10% your order at https://www.prolineracing.com/

SPONSORED ARTICLE

*Discover: A few of our articles, movies and descriptions might comprise affiliate hyperlinks, which implies that in case you click on on one of many product hyperlinks, we might obtain a small fee. This helps help the web site and social media channels and permits us to proceed to provide content material. Thanks for the help!

The publish 10 Race-Winning Touring Car Bodies From PROTOform appeared first on RC Driver.