6 Cool Hop-Ups For the 6×6 Tamiya Trucks

6 Cool Hop-Ups For the 6×6 Tamiya Trucks

SPONSORED ARTICLE

Six-wheel-drive vehicles undertaking a legit air of toughness once they energy over and thru tough off-road terrain. It may be argued that Tamiya determined to supply the G6-01 6WD chassis established on this very attribute. Right this moment Tamiya provides 4 automobiles primarily based on the G6-01 chassis: the Konghead, King Yellow, Dynahead and the Volvo A60A Hauler. Every has its very personal distinctive look that mix with the off-road prowess of a 6WD platform to create some very cool trying and performing vehicles. This made these vehicles the proper topic for this text the place we share 6 cool hop-ups for the 6×6 Tamiya vehicles.

6 Cool Hop-Ups For the 6x6 Tamiya Trucks


6 Cool Hop-Ups For the 6x6 Tamiya Trucks
6 Cool Hop-Ups For the 6x6 Tamiya Trucks


6 Cool Hop-Ups For the 6x6 Tamiya Trucks
6 Cool Hop-Ups For the 6x6 Tamiya Trucks

TAMIYA G6-01 CHASSIS

The star of the G6-01 chassis is clearly the absolutely gear pushed six-wheel-drive drivetrain. Tamiya didn’t go along with a shaft- or belt- or chain-drive mechanism and reasonably developed a really intelligent setup that makes use of nothing however gears to drive all six of the tires. Simply try the picture beneath which fantastically illustrates how Tamiya made the G6-01 chassis perform. As you’ll be able to see the chassis doubles because the gearbox to surround and defend the entire gears the drive these 6×6 vehicles.

6 Cool Hop-Ups For the 6x6 Tamiya Trucks

So as to assist these rigs nook extra easily, Tamiya employed three strong gear differentials fitted with metallic outdrives. Mounted on the correct aspect of the chassis behind the entrance wheel is a Tamiya 540 brushed motor that drives all six wheels. An unbiased double-wishbone suspension setup is utilized for every of the six wheels and tires utilizing a decrease H-arm and a hard and fast higher hyperlink. Offering the damping are six friction shocks connected to every H-arm. Mounted on the higher left aspect of the chassis is the steering servo with 2-piece adjustable steering hyperlink setup. The general design of the Tamiya G6-01 chassis makes for a really robust automobile that will probably be proper at residence on all sorts of terrain.

THE G6-01TR CHASSIS VARIATION

Three of the 4 6×6 vehicles are constructed on the usual G6-01 chassis. The Dynahead is the one one which comes with the G6-01TR chassis variation. The important thing distinction is that it comes with hub discount axles, also called portal axles. These axles increase the bottom clearance by 15mm, however the important thing profit is that additionally they generate some main crawling traction with a 37.35:1 gear ratio. With this low gear ratio, the G6-01TR chassis has gobs of torque for some critical climbing motion. One other tweak that Tamiya made is definitely a easy one and one thing you are able to do to just about any automobile with a gear diff. The G6-01TR package comes with some putty to lock the diffs. All you do is take a small part of the putty, roll it right into a ball after which place it contained in the differential. The putty will basically ‘lock’ the diff in order that the truck has full-time traction when traversing steep or robust climbs. Lastly, the TR model is supplied with good trying 5-spoke wheels which are wrapped with V-tread block tires. This tire package deal makes the Dynahead a extra succesful off-road automobile due to the added chunk that the tires create.

TAMIYA G6-01 HOP-UP OPTION PARTS

G6-01 Clear Grey D Chassis Components, #54807

6 Cool Hop-Ups For the 6x6 Tamiya Trucks

As talked about earlier, the built-in chassis and gearbox of the G6-01 6×6 chassis may be very spectacular in that it drives all six wheels solely with gears. Truthfully it’s a little bit of a waste to have this cool drivetrain hidden behind the darkish black plastic chassis/gearbox halves. Nicely, Tamiya has an answer for this little situation and it’s with their hop up choice G6-01 clear grey D chassis components. These components are molded in a transparent grey polycarbonate substitute the inventory chassis and as soon as in place it is possible for you to to see the internal workings of the drivetrain.

Clearly, set up is a time consuming activity for the reason that G6-01 chassis will must be virtually solely taken aside. Since these components are precisely the identical in measurement and form, you’ll be able to comply with the unique instruction handbook to get all of it again collectively with out the necessity for any hand becoming. If you wish to take it a step additional, you’ll be able to add a splash of shade with Tamiya’s elective gears with loafer gear units molded in orange (#54808) and equipment units molded in yellow (#54809).

Aluminum Motor Guard, #54817

6 Cool Hop-Ups For the 6x6 Tamiya Trucks

In the event you already personal one of many Tamiya 6×6 vehicles or in case you merely have a look at the images of the chassis, you will note that the situation of the inventory brushed motor will not be in a perfect spot to maintain it protected. It’s positioned behind the primary set of tires on the correct aspect of the chassis and is totally uncovered and susceptible to being hit by objects whereas driving round. For the reason that chassis is a monocoque design with quite a few gears inside to make the G6-01 six-wheel-drive, the motor needed to be mounted externally. The Aluminum Motor Guard proven here’s what Tamiya created in order that it could possibly assist defend the motor from impacts in addition to act as a heatsink to dissipate warmth.

Getting the guard in place is fairly easy and solely requires the motor to be eliminated. Tamiya contains the 2 cap screws to get it connected they usually even embody a hex wrench to finish the job. As soon as put in the fantastically machined aluminum half with blue anodizing may also improve the look of the chassis.

GF-01 Aluminum Steering Arm, #54588

Steering methods have a vital job and are confronted with a number of stresses when the automobile is out tearing round, particularly off-road automobiles. The steering arm that comes with Tamiya G6-01 chassis is molded from plastic which could be a weak hyperlink within the steering system and could be a supply of steering slop. That is the part the place the hyperlink from the steering servo attaches in addition to the 2 steering hyperlinks that join out to the steering knuckles which makes it a crucial half within the steering setup. A greater choice over the inventory half is the Tamiya GF-01 Aluminum Steering Arm proven right here. It’s masterfully machined out of aluminum and anodized blue thus making this stout steering arm improve in a position to supply extra exact steering enter and higher sturdiness. A hole shaft is included with the steering arm and you utilize the inventory 850 metallic bushings. As soon as put in, one can find your G6-01 6×6 truck to have sharper steering response and smoother steering motion.

GF-01 Aluminum Oil Damper, #54670

6 Cool Hop-Ups For the 6x6 Tamiya Trucks

Tamiya spec’d their easy-to-build, easy-to-maintain and price saving friction shocks for the G6-01 chassis that are used on lots of their kits. The draw back of those models is they have an inclination to make a automobile bounce round rather a lot when traversing off-road terrain. The best remedy for this trait is to swap out the friction shocks with these high-quality aluminum, threaded physique, oil-filled shocks. Simply keep in mind that you will want two packages to fully outfit the G6-01 chassis since there are solely 4 dampers included.

Tamiya contains every little thing it is advisable assemble the shocks after which set up them onto the G6-01 chassis…even the damper oil. The standard stage of those shocks is first fee and can present silky clean efficiency. Every aluminum cylinder has a silver end which contrasts properly with the blue anodized caps and ends. As soon as put in, one can find that the experience will probably be a lot smoother because the oil-filled shocks supply superior cushioning on tough surfaces thus eliminating the unrealistic look of the 6×6 vehicles bouncing as they drive round. As an added bonus, your Tamiya 6×6 will look a lot cooler as a result of it is possible for you to to see these candy shocks for the reason that our bodies sit fairly excessive on the chassis.

Aluminum Entrance Skid Guard, #54796

We’re not an enormous fan of the appears of the inventory entrance bumpers on the Konghead, King Yellow and Dynahead vehicles with the black plastic bumper that’s spring supported. (The Volvo A60A Hauler additionally has a spring supported bumper but it surely completely matches as much as the remainder of the cab and would make the truck look odd with out it.) You possibly can substitute the inventory bumper with the elective Tamiya Aluminum Entrance Skid Guard. Simply because the identify implies, it’s fully machined out of aluminum after which anodized silver. This three piece skid guard securely mounts onto the chassis with the included {hardware}.

Mounting the skid guard is uncomplicated and may be performed shortly. As soon as in place it enhances the bling issue on the chassis and will increase safety on the entrance finish. However that’s not all. The skid has a 40-degree angle which permits these automobiles to deal with massive obstacles simpler.

WR-02 Meeting Common Shaft, #54394

6 Cool Hop-Ups For the 6x6 Tamiya Trucks

The final of the 6 cool hop-ups for the 6×6 Tamiya vehicles are the WR-02 Meeting Common Shaft. Don’t be involved with the reference to the WR-02 chassis, these universals will work on the G6-01 platform. Positively think about putting in these onto your truck if you wish to pull out some extra efficiency. The Meeting Common Shaft will scale back friction loss within the drivetrain and guarantee clean energy switch to the wheels comparted to the inventory dogbones.

These Tamiya 6×6 vehicles would require three pair of the common shafts to exchange all of the dogbones. They arrive unassembled but go collectively effortlessly because of the clear instruction sheet. Together with scrapping the inventory dogbones, the wheel axles are additionally changed. In the event you nonetheless have the inventory plastic bushings within the uprights and steering knuckles, think about additionally upgrading to some high quality ball bearings when you have these components unassembled.

For extra details about Tamiya merchandise, go to: TAMIYA

SPONSORED ARTICLE

The publish 6 Cool Hop-Ups For the 6×6 Tamiya Trucks appeared first on RC Driver.