Kyosho FLYSKY RM005 Module (Mini-Z/FHSS)

Kyosho FLYSKY RM005 Module (Mini-Z/FHSS)

From Kyosho:
Take management of the MINI-Z with the high-end radio Noble NB4.

By utilizing this module together with the Noble NB4 transmitter, the MINI-Z RWD / AWD / FWD / Buggy / 4×4 Readyset collection with numerous KT-531P transmitters and the MINI-Z EVO receiver unit (No. The MINI-Z EVO collection (MR-03EVO / MA-030EVO) mixed with 82041) will be operated. It’s essential to insert this module into the slot within the grip of Noble NB4, obtain the suitable firmware (Ver.2.0.97), and replace the transmitter.

*Works with white antenna wire outfitted Mini-Z’s*

When utilizing the firmware (Ver.2.0.97) and the MINI-Z EVO receiver unit (No.82151-03) together, it’s essential to replace the receiver on the transmitter aspect. Observe the process under to replace the receiver.

1. Choose the radio frequency setting from the mannequin reminiscence
2. After deciding on the RF Std. Menu, choose Mini-Z (EVO)
3. Choose receiver replace from RX settings
4. Press the replace icon displayed within the heart, then press the OK icon.
5. When the updating (0%) display is displayed, activate the ability whereas urgent the bind button of the chassis outfitted with the receiver unit (82151-03) and look ahead to some time. Launch the bind button when the blinking pace of the LED on the receiver unit adjustments.
6. Verify that the show on the transmitter aspect is up to date (100%) and accomplished.
7. Press the Again button and choose Bind Set to finish the binding.

#82151-11 – $29.99
Visit KyoshoAmerica.com
See more posts about Kyosho

Kyosho FLYSKY RM005 Module (Mini-ZFHSS)

Kyosho FLYSKY RM005 Module (Mini-ZFHSS)

Kyosho FLYSKY RM005 Module (Mini-ZFHSS)

Kyosho FLYSKY RM005 Module (Mini-ZFHSS)

The submit Kyosho FLYSKY RM005 Module (Mini-Z/FHSS) appeared first on RC Car Action.

Leave a Reply

Your email address will not be published. Required fields are marked *