Team Associated RC8B4 Team Kit [VIDEO]

Team Associated RC8B4 Team Kit [VIDEO]

Team Associated RC8B4 Team Kit

Team Associated RC8B4 Team Kit

Team Associated RC8B4 Team Kit

From Team Associated:
PUSHING THE BOUNDARIES.

1:8 scale off street racing is without doubt one of the pastime’s most difficult disciplines; it requires a excessive commonplace and calls for consideration to element. The newest growth to come back from Related Electrics’ Space 51 is designed to push boundaries of efficiency and construct upon the variety of accolades amassed by the RC8 sequence.

RC8B4 Group Package Options:

Revolutionary front-end geometry with decreased kingpin inclination steering blocks locations the wheel pivot within the middle of the entrance tire for elevated stability and constant steering by way of the complete steering throw

  • Paired with a brand new wider higher suspension arm pivot

New gearboxes are particular to entrance and rear

  • Entrance gearbox includes a 3.5 deg. inclined pinion gear angle to straighten the middle driveshaft for elevated drivetrain effectivity and decreased phasing and vibration
  • Rear gearbox includes a 0 deg. pinion gear angle and middle mounted rear chassis brace mount
  • Each gearboxes function bigger bearing sizes over RC8B3. Switching to a 6x13x5mm flanged bearing (from a 6x12x4mm non-flanged) leads to longer lifetime of bearings and ring and pinion gears
  • Lowered {hardware} on anti-roll bar cap for straightforward meeting and upkeep
  • Elevated energy in frequent areas of half fatigue; significantly across the pinion gear and outer cap

New entrance higher suspension arm design

  • Designed to accommodate a variety of flex and stiffness choices
  • Non-compulsory inserts will probably be made obtainable for fantastic tuning flex and stiffness and can match on the highest or backside of the arm
  • Features a molded “wing” insert for elevated front-end downforce
  • Makes use of a replaceable molded hinge pin bushing to scale back slop and improve suspension dynamics

New entrance decrease suspension arm design

  • Designed to accommodate a variety of flex and stiffness choices. Non-compulsory inserts will probably be made obtainable for fantastic tuning flex and stiffness
  • New one-piece anti-roll bar hyperlink mounts in-line with the anti-roll bar with a BHCS as a substitute of a shock pin for simplified meeting
  • Non-compulsory inserts mount to the highest or backside face of the arm–racers alternative!

New rear suspension arm design

  • Designed to be of optimum flex and stiffness with no insert. Nonetheless, optionally available inserts will probably be made obtainable for fantastic tuning flex.
  • Non-compulsory inserts will probably be made obtainable for fantastic tuning flex and stiffness and can match on the highest or backside of the arm
  • New angled one-piece anti-roll bar hyperlink is mounted in-line with the anti-roll bar with a BHCS as a substitute of a shock pin for simplified meeting

New rear wing mount has adjustable wing angle shims, vital energy enhancements, an aerodynamic form, and further clearance for shock place adjustment

  • Two wing top choices can be found to tune the rear downforce
  • Three wing angle positions: 0, -2, and -4 levels.
  • The improved design additionally secures the wing mounting nuts in order that they won’t spin within the mount
  • The 4 wing mount screws into the rear tower entry from the rear finish of the buggy for simplified upkeep

New rear wing has extra vertical fins for elevated straight-line stability, a taller rear wickerbill top for elevated downforce, elevated energy in varied areas to scale back bending fatigue, and dimples on the bottom as a template for cutout holes

  • Two wing buttons are included for added tuning choices: the primary is a standard one-piece flat button and the second is a vertical stabilizing fin for much more straight-line stability

New rear chassis brace has a number of design options and flex choices

  • Rear brace is mounted centrally to the gearbox, which reduces materials fatigue, centralizes shear forces, and improves the lifetime of rear finish drivetrain components
  • Has three completely different chassis flex choices utilizing two chassis gap mounting areas
    1. Use each screws (most inflexible).
    2. Use one screw, lengthy location.
    3. Use one screw, brief location (most versatile)
  • The higher brace joint has two flex tuning choices on the gearbox
    1. With included molded inserts that forestall twisting and solely enable flex alongside the centerline pivot of the brace.
    2. With optionally available turnbuckle ball for flex in additional levels of freedom.
  • Detachable insert to customise the quantity of flex within the brace

New +1mm offset rear hub includes a symmetrical left and proper frequent design with axle top inserts for adjustable roll middle tuning

  • The usual bearing dimension used is an 8x16x5mm flanged however the hub will nonetheless settle for 15x21x4mm bearing for CVA axle tuning choices

New gasoline tank with many new options

  • A brand new footprint to combine with new steering bellcrank place
  • Optimized gasoline tank capability
  • Consists of an ergonomically designed lid puller
  • Sprint marks on the higher gasoline tank half are measurement indications for rapidly checking remaining gasoline capability after a session
  • Elevated splash guard top
  • Longer lid pivot size leads to a greater closure and seal between lid and tank
  • Three stackable inserts are included for quantity adjustment at sanctioned occasions

Specs:

Energy Supply: Nitro Gas
Terrain: Off-Street
Physique Type: Buggy
Scale Measurement: 1:8 Scale
Meeting Stage: Package*
Size: 486mm (19.13in)
Width: 304.5mm (11.99in)
Wheelbase: varies
Weight: varies
Drive: 4WD

* This car comes as a equipment and have to be totally assembled by the person. Electronics and/or an engine/motor could also be required.

Required to Full:

1:8 scale nitro motor (.21 class rear exhaust engine)
Exhaust system: muffler and header becoming a member of pack or muffler spring
4.8V-7.6V receiver battery
Battery charger (fitted to one of many batteries talked about above)
2-channel floor transmitter, 2-channel receiver, and steering servo
Lexan(R) particular spray paint for physique
1:8 scale off-road wheels and tires
4x AA batteries
Different useful gadgets: Silicone Shock Fluid, Silicone Diff Fluid, Physique Scissors (#1737), Reamer (#1499), FT Wrench Set (#1519), 5mm hex driver (#1519), Pastime Knife, Needle Nostril Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler.

#80945 – $699.99 MAP
Visit AssociatedElectronics.com
See more posts about Team Associated

Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit Team Associated RC8B4 Team Kit

The put up Team Associated RC8B4 Team Kit [VIDEO] appeared first on RC Car Action.

Leave a Reply

Your email address will not be published.

A note to our visitors

This website has updated its privacy policy in compliance with changes to European Union data protection law, for all members globally. We’ve also updated our Privacy Policy to give you more information about your rights and responsibilities with respect to your privacy and personal information. Please read this to review the updates about which cookies we use and what information we collect on our site. By continuing to use this site, you are agreeing to our updated privacy policy.