Serpent SRX8 GTE RTR 1/8 4WD EP

Serpent SRX8 GTE RTR 1/8 4WD EP

Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP

From Serpent:
Serpent now gives the SRX8 GTE additionally in a Prepared To Race, to make this excellent automobile much more engaging to a broader buyer base, so additionally Pastime racers can now take part for the motion. Prime-quality parts packed in a Prepared-to-race bundle, the most effective begin a Pastime-driver could make. Excessive finish racing chassis with top of the range elements, spectacular 2.4 GHz transmitter, Waterproof digital pace controller with small footprint, which inserts the SRX8 GTE like a glove mixed with a powerful 1900KV brushless motor with a lot of torque.

Options:

Chassis plate

Chassis plate in3mm7075 T6 aluminum. Kick-up angle on entrance for stabile landings. Countersunk holes. Slots to find the entrance and rear suspension mounts exactly. Angled sides to extend stiffness.

Bumper

Giant foam bumper, which is stored in place by an higher and decrease nylon bumper plate.

Chassis stiffners

Composite stiffner entrance and rear, to provide further stiffness, however nonetheless permit some flex as wanted.

Central radio / servo mount

Composite compact radiobox which gives good house for the steering servo and the receiver.

Battery-cases / side-guards

The primary eyecatchers are the extraordinarily low laydown longitudinal positioned battery-packs at either side of the automobile, being a part of the side-guards, securely fixed with a Velcro strap, for simple and quick battery modifications. The burden low within the automobile and in the best place, properly balanced. The Lipo holders adjust to ROAR authorized packs / dimensions.

Motor mount:

The motor is positioned in probably the most optimum place within the automobile, retaining motor-forces and transmission elements / alignment in thoughts. Just one-screw is required to safe the BL motor, within the properly designed sturdy machined aluminum motor mount. House for added motor-cooling obtainable as wanted.
The house for the motor permits a most motor-length of 70mm, which covers most generally used motors (apart from the truggy / monster truck motors).

Steering blocks meeting

Composite steering blocks mixed with 10 degr C-hubs for exact steering. Spring metal wheel-axles with massive dimension bearings and bigger inside with precision threaded aluminum wheel-hubs with offset. Flanged wheel nuts to ensure that you’ll not lose a wheel nut in a race.

Entrance suspension

Sturdy outsized decrease suspension arms in robust composite nylon. On the decrease aspect the particular formed downstops screws are mounted. The decrease shock-mounting pins are secured with a small grubscrew from the underside.

Entrance anti-roll bar

The entrance anti-roll bar system, include a spring metal bend wire, which is guided by means of the diff-cases and runs in metal adaptors. The wire is linked to the decrease suspension arm, with a captured adjustable threaded pivot ball, for very exact and low friction operation and simple tuning.

Shock tower and physique mounts entrance

4.0mm thick aluminum anodized shock tower with 3 higher positioning holes for the shocks and 4 holes for roll-center positions. Robust, in peak adjustable physique mounts with huge prime part to seat the physique properly.

Rear suspension arms and uprights

Sturdy longer outsized decrease suspension arms in robust composite nylon. On the decrease aspect the particular downstops screws are mounted. The decrease shock-mounting pins are secured with a small grubscrew from the underside. Composite uprights with 3 higher roll-center positions. Robust metal track-rods with L/R threading and robust balljoints to pre-set camber. Arduous metal wheel-axles with massive dimension bearings and bigger inside ones with precision threaded aluminum wheel-hubs with offset. Flanged wheel nuts to ensure that you’ll not lose a wheel nut in a race.

Shock tower rear and Physique mount

4mm thick aluminum shock tower, built-in into the rear part for further stiffness, with 4 higher positioning holes for the shocks and 4 holes for roll-center positions.
Polycarbonate rear low aero wing. Central rear physique mount with the rear physique submit, that are adjustable in peak simply.

Captured pivot pins and balls and bolted hinge pins

All spring-steel hinge pins are both captured or bolted in place and made in spring-steel high quality. This relieves stress on the hinge pin when adjusting the kick up, or anti squat. Your pin is free to rotate to any angle with out binding.

Shock absorbers RCM big-bore 16mm / RCM shock springs

Anodized aluminum shock our bodies with sturdy 4mm shock-rods. Pre-load adjuster clips for trip peak setting. Shocks use massive diameter membranes and huge diameter O-rings and bushings to create an excellent clean and leak-proof bundle. Giant diameter pistons are held in place by a nut on the polished shock-rods tops. Open kind spring retainer to let dust out straightforward.
Coloration-coded progressive race shock springs are equipped for the first customary set-up and all springs are grinded flat prime and backside and checked individually for pressure and size and are matched.

Compact gear differentials and central stable axle.

Very compact gear differentials with very clean metallic sintered gears, and metal shaft. Excellent sealing case with particular gasket and O-rings. Very mild and sturdy outdrive cups in spring-steel. Hardened spring-steel diff-coupler 13T with connector working in 2 outsized bearings The SRX8 GT-E makes use of a 13T / 44T combo gearing.44T central stable axle. This drive ratio will present superb acceleration mixed with the low car weight.

Entrance and rear drive

The entrance has captured driveshafts utilizing a CVD system. The rear has sturdy black metal driveshafts with onerous metal pins.

Physique

Serpent tremendous low SRX8 GT physique, absolutely pre-painted in a really engaging design and pre-cut too. The very low physique has glorious dealing with and downforce

Tires / wheels

The Cobra is fitted with pre-mounted DragonRC GT racing tires. The tires are glued on sturdy however versatile DragonRC race-wheels with cell-foam inserts. An excellent-package for glorious grip on the commonest surfaces.

Transmitter and receiver

  • The DragonRC DTS-3 2.4GHZ pistol kind transmitter
  • The small and light-weight receiver is fitted contained in the radiobox of the automobile.

Pace-controller and Brushless motor.

The digital pace controller is a completely Waterproof 120A unit from DragonRC with a small footprint which inserts the SRX8 GTE like a glove. The brand new fashionable design may be very small and engaging wanting. Prime-quality delicate silicone coated cables.

The DragonRC brushless sensorless motor is a powerful 1900kv unit which supplies a lot of torque and superb prime pace and is anodized in identical bronze colour as the opposite alu elements of the automobile.

Oils and grease

Prime-quality silicone shock-oil, silicone diff oil and a few greases are used to satisfy the usual set-up.

Guide and set-up

Full colour consumer handbook with easy-to-follow steps, exploded views for simple spares ordering. A separate handbook for the transmitter and the pace controller is included.

Decals

Black and white promo body-decals; Serpent generic and SRX8 GT ones.

Packing

The RTR equipment is packed in a colourful massive robust packing field with safety for automobile and transmitter.

Essential options:

  • Race prepared excessive efficiency 1/8 electrical GT
  • Knowledgeable pre-assembled and pre-set
  • 4WD with cardan shafts, 2 compact ,sturdy gear diffs, super-easy machined aluminum motor mount, tremendous low longitudinal battery bins, compact speedo-servo mount, distinctive angled steering system, 16mm large bore shocks, ball raced anti-roll bars FR and RR, 7075 T6 alu shock tower FR and RR, sturdy suspension and transmission elements, captured suspension pins, the works !!
  • Dragon-RC pistol kind transmitter 2.4 GHz
  • Dragon-RC 120A waterproof pace controller
  • Dragon-RC highly effective 1900kv brushless sensorless motor
  • Dragon-RC 15kg robust servo with metallic gears
  • Dragon-RC excessive grip pre-mounted GT race tires and wheels
  • Pre-painted and precut ultra-low GT bodyshell and huge rear aero-wing
  • Full colour consumer handbook and decal set included

Service and Assist

The Serpent distributor, seller or agent is your supply for more information, but in addition the Serpent web site and the member part and the YouTube channel supplies a lot of info.

Wanted to finish the automobile:

  • 4 x AA batteries for the transmitter
  • 2 x Lipo hard-packs3800 mA or extra
  • (charging gear/ energy provide)

#600061
Visit Serpent.com
See more posts about Serpent

Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP Serpent SRX8 GTE RTR 1/8 4WD EP

The submit Serpent SRX8 GTE RTR 1/8 4WD EP appeared first on RC Car Action.

Leave a Reply

Your email address will not be published.

A note to our visitors

This website has updated its privacy policy in compliance with changes to European Union data protection law, for all members globally. We’ve also updated our Privacy Policy to give you more information about your rights and responsibilities with respect to your privacy and personal information. Please read this to review the updates about which cookies we use and what information we collect on our site. By continuing to use this site, you are agreeing to our updated privacy policy.