Team Associated RC10B6.4D Team Kit

Team Associated RC10B6.4D Team Kit

Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit

From Team Associated:
The RC10B6.4 platform continues the development of providing two package configurations. Each kits embrace the subsequent technology 13mm diameter big-bore shocks and comes to supply the final word in damping and stability. The bigger diameter shocks cut back strain contained in the shock and reduce the consequences of the shaft displacement. This permits the buggy to really feel prefer it’s driving on an invisible cloud while you hit harsh jumps and landings. The chassis, entrance finish, and steering system is optimized for working lowered caster and kick-up, which excels on excessive pace, excessive grip surfaces. An up to date steering system with adjustable top bellcranks helps racers reduce bumpsteer. As well as, the entrance suspension is supplied with new -1mm kingpin offset steering and caster blocks for clean and predictable entrance finish really feel by way of your complete throw. The -1mm design pushes the steering pivot nearer the middle of the entrance tire, retaining the entrance finish flat by way of your complete steering throw.

Each buggies are outfitted with a brand new chassis structure and ESC weights that enable ahead mounted electronics nearer to the servo, in addition to further ahead battery placement over the earlier mannequin. The entire new weight tuning choices enable for extra high-speed stability and on-power steering on excessive grip carpet. The #90034 RC10B6.4 Group Package would be the buggy of alternative for top grip carpet or turf observe surfaces with the brand new +3mm chassis structure, 11mm Octalock LCF slipper clutch setup, metal ESC and servo weights, and included anti-roll bars entrance and rear. The #90035 RC10B6.4D Group Package features a new dirt-length 19mm Octalock LCF slipper clutch setup, aluminum ESC weight, layback gearbox, and an optimized filth package setup.

Each vehicles share many nice options, akin to an easy-access rear differential, new broad pivot rear aluminum arm mounts to be used with 73mm arms and 69mm CVA bones, and up to date carbon fiber shock towers with molded protecting covers. The setups and tuning components stay interchangeable between the 2 configurations. Each variations include the pace, sturdiness and lineage anticipated of a real champion. Select the configuration that fits your observe and conquer the competitors!

New Options:

  • New 13mm big-bore threaded aluminum shocks and comes with machined shock pistons for improved bump and soar dealing with
  • New filth size aluminum chassis with 22.5deg. kick-up to enrich up to date front-end geometry and with new form to scale back chassis scrub with the observe floor
  • 20deg, 22.5deg, and 25deg molded bulkheads included for a whole vary of caster and kickup choices
  • New adjustable top steering bellcrank and rack system for optimized bumpsteer in any respect trip heights and caster angles
  • New -1mm kingpin offset steering and caster block set for smoother and extra predictable steering by way of your complete wheel throw
  • New metal RC10B6.4 ESC mounting tray shifted ahead within the chassis and with a wider footprint to suit electronics, leading to an additional ahead weight bias
  • New entrance ballstud mount, high plate, and entrance wing mount to account for the kickup angle change
  • New chassis aspect rails with three fan mount places to select from relying on chassis size and transmission used
  • New caged thrust bearing for ball differential
  • New cab-forward design RC10B6.4 bodyshell provided in customary (package) and light-weight (non-compulsory) thickness

Legacy Options:

  • 4mm carbon fiber entrance and rear shock towers with molded protecting covers
  • Aluminum servo mounting system with direct-to-chassis mounts and molded brace with transponder mounting location
  • Octalock spur gear and 19mm Octalock LCF pads
  • Broad pivot rear aluminum arm mounts to be used with 73mm arms and 69mm CVA bones provides extra predictable rear traction and an easy-to-drive rear-end really feel. Additionally suitable with 75mm non-compulsory arms utilizing the narrowest insert settings.
  • Symmetric rear arms with improved geometry and stiffness that may be flipped to permit a “cut up” for rear shock mounting place. Arms can be found in 73mm and 75mm lengths (73mm included)
  • Rear hub meeting with modular vertical ball stud camber hyperlink mounts and axle top changes for exact roll heart changes
  • Outer rear hinge pins captured with bolt head and locknut for elevated sturdiness
  • Clear physique and clear wing included
  • Entrance wing mount and entrance wing included
  • Rod finish battery brace components and {hardware} included in package
  • Molded wire clips included for motor and ESC wires
  • +1 carbon fiber steering arms
  • Black metal LP serrated wheel nuts
  • 69mm CVA bones for lowered bone plunge and minimized friction at drive pin
  • Aluminum electronics plate included for improved mass stability and decrease general heart of mass
  • 5mm aluminum clamping wheel hexes
  • Ball differential included
  • Lay-down and Lay-back transmission assemblies included for tuning mass stability to completely different observe surfaces
  • Adjustable differential top to permit drive shaft alignment by way of all trip top & axle top configurations
  • Shocks embrace X-rings for low friction meeting
  • Aluminum rear ballstud mount with three hyperlink positions choices for optimum adjustability and added energy
  • Light-weight aluminum one-piece high shaft and equipment
  • Manufacturing facility Group ball bearing set with 24 precision ball bearings, now oiled as a substitute of greased for extra environment friendly drivetrain


Energy Supply: Electrical
Terrain: Off-Highway
Physique Model: Buggy
Scale Measurement: 1:10 Scale
Meeting Stage: Package*
Size: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Gear Ratio: 2.60:1
Drive: 2WD

* This car comes as a package and have to be absolutely assembled by the consumer. Electronics and/or an engine/motor could also be required.

Required to Full:

  • 1:10 scale electrical motor and digital pace management (Motor: #27402 or #27441. ESC: #27004)
  • 7.4V-7.6V 2S LiPo with “shorty” battery dimensions (customary or low-profile top) (#27382 for six.4D or #27384)
  • Battery charger (suited to, and specific to, one of many batteries talked about above) (#27403)
  • 2-channel floor transmitter, 2-channel receiver, and steering servo (#27119)
  • Lexan(R) particular spray paint for physique
  • 1:10 scale off-road wheels and tires
  • 4x AA batteries (#302)
  • Different useful gadgets: Silicone Shock Fluid, Silicone Diff Fluid, Physique Scissors (#1737), Reamer/Gap Punch, FT Wrench Set (#1519), Interest Knife, Needle Nostril Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler

#90035 – $389.99 MAP
See more posts about Team Associated

Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit Team Associated RC10B6.4D Team Kit

The publish Team Associated RC10B6.4D Team Kit appeared first on RC Car Action.

Leave a Reply

Your email address will not be published.

A note to our visitors

This website has updated its privacy policy in compliance with changes to European Union data protection law, for all members globally. We’ve also updated our Privacy Policy to give you more information about your rights and responsibilities with respect to your privacy and personal information. Please read this to review the updates about which cookies we use and what information we collect on our site. By continuing to use this site, you are agreeing to our updated privacy policy.